Gate stuck and you need in or out right now?Open it by hand →
Fix My Electric Gate

Gate opener dead after an outage or lightning storm?

The storm passed, the lights came back, and the gate didn’t. Here’s why.

After a storm, gate calls spike. Most come down to the same few causes.

Try a reset first

Some openers lock up after an outage. Turn the power switch off, wait a minute, and turn it back on. Check the breaker too.

Dead battery

A long outage drains the backup battery. Once power is back, give it time to charge. If it never recovers, the battery may be finished.

Surge damage

The spike when power comes back, or a strike nearby, can fry the control board. Lightning can also travel in on long low-voltage wiring to keypads and sensors. Signs: no lights on the board, a burnt smell, or random behavior.

Prevent the next one

  • Surge protection on the power feed to the gate
  • Surge protection on long low-voltage runs
  • Good grounding at the operator
  • A healthy battery so the gate rides through short outages

Ask the tech about adding protection when they replace the board. It costs much less than the next board.

Let’s get it moving.

Tell us what the gate is doing. A local gate tech follows up.

Request a repair
Request a repair