Storm, surge or impact damage
Lightning, high water, hurricane winds and the occasional truck. South Louisiana is hard on gates.
Lightning and power surges
A strike nearby or a surge when the power comes back is the top killer of gate control boards here. The gate goes dead, or acts erratically. Boards can often be replaced, and surge protection can be added so it doesn’t happen again.
Flooding
If the opener or control box went under water, don’t run it. Turn off the power and have it checked. Water and electronics don’t mix, and corrosion shows up later.
Wind and hurricanes
High wind can bend leaves, twist hinges, crack posts and strip an opener’s gears. Look the gate over before you try to run it.
Vehicle hits
A bent leaf, a leaning post or a sheared arm. Don’t try to operate a gate that was hit. It may be out of square and bind, or a damaged arm may let go.
What to do first
- Turn off power to the gate.
- Take photos of the damage for insurance.
- If you need in or out, open it by hand if it’s safe to.
- Request a repair and tell us what happened.
Safety first. An automatic gate can start moving on its own. Stay out of its path, and turn off the power before you touch the opener, the arm or the control box. Leave board and wiring work to a technician.
Questions
Does insurance cover gate damage?
Storm damage and vehicle hits are often covered by homeowner’s or property insurance, or the driver’s auto policy. Photos help. Check with your agent.
Can a lightning-damaged opener be repaired?
Often. The control board is usually what fails, and it can be replaced. Sometimes motors or accessories are damaged too.