Gate won’t close
A gate stuck open is no gate at all. Most of the time, a safety device is telling the opener something is in the way.
Common causes
- Photo eyes blocked or out of line: grass, a spider web, a bumped post, or low sun shining straight into the receiver.
- Vehicle loop or exit sensor stuck: a damaged loop in the pavement or a faulty sensor can make the opener think a car is always there.
- Hold-open setting: a timer or schedule set to keep the gate open, or a keypad command left on.
- Edge sensor triggered: a damaged safety edge can hold the gate open.
- Low battery: some openers open and stay open when the battery runs low, by design.
- Board or limit problem: the opener has lost track of where closed is.
What you can check safely
- Look at the photo eyes. Most have a small light that changes when they’re aligned. Clear anything between them.
- Wipe the lenses with a soft cloth.
- Check that nothing is parked over the exit sensor or loop.
- Check the battery and power.
Safety first. An automatic gate can start moving on its own. Stay out of its path, and turn off the power before you touch the opener, the arm or the control box. Leave board and wiring work to a technician.
When to call a tech
If the eyes are clear and aligned and it still won’t close, or the loop or sensor is damaged, request a repair. Never bypass a safety device to get the gate to close. They’re what keep the gate from closing on a person or a car.
Questions
Can I disconnect the photo eyes to make it close?
No. Current openers require them to run normally, and they’re what stop the gate from closing on someone. Have a tech fix the problem.
Why does my gate only stay open in the afternoon?
Low sun shining directly into a photo eye receiver can blind it. A tech can re-aim or shade it.