Safety first. An automatic gate can start moving on its own. Stay out of its path, and turn off the power before you touch the opener, the arm or the control box. Leave board and wiring work to a technician.
1. Make sure nobody is near the gate
Keep kids, pets and cars out of the gate’s path the whole time.
2. Turn off the power
Use the power switch on the control box, or the breaker that feeds the gate. On solar gates, the control box usually has a power switch too. This keeps the opener from starting while you’re working on it.
3. Find the release
- Swing gate with an arm opener: most arms have a release, often under a cap that takes a key, or a pin that connects the arm to the gate bracket. Releasing it lets the gate swing free of the arm.
- Swing gate with an underground operator: usually a key-operated release at the hinge.
- Slide gate: usually a key or lever on the operator that frees the drive, or a way to disconnect the chain from the gate.
The release key is often on a ring that came with the opener. Check the owner’s manual or the inside of the control box lid.
4. Move the gate slowly
Gates are heavy. Walk it open slowly and keep your hands away from hinges, rollers and the gap at the post. A slide gate on a slope can roll on its own once released.
5. Secure it
Hold the gate open or closed with a chain, a drop rod or a latch so wind doesn’t swing or roll it.
6. Leave it for the tech
Tell the tech the gate was released. Re-engaging the opener usually means the gate has to be in a certain position, and limits may need to be reset.