Gate stuck and you need in or out right now?Open it by hand →
Fix My Electric Gate

Five checks before you call

A lot of “broken” gates are a tripped breaker or a spider web. Five minutes might save you a service call.

1. Power

Check the breaker that feeds the gate and any GFCI outlet along the way. Make sure the power switch on the control box is on. After an outage, some openers need a power cycle: off for a minute, then back on.

2. Battery

A gate that’s slow, beeps, or quits halfway often has a weak battery. On solar gates, check that the panel isn’t shaded or covered in pollen, and think about the weather lately.

3. Photo eyes

Look at the safety eyes on both sides of the gate. Clear grass, webs and debris, wipe the lenses, and check the indicator lights. A bumped eye out of line will stop a gate from closing.

4. Remotes and keypad

Try a second remote or the keypad. If one works, the gate is fine and the problem is the remote. Replace its battery.

5. The gate itself

Look for anything in the way: debris in a slide track, a branch, a bent leaf. Make sure the manual release wasn’t left engaged.

Safety first. An automatic gate can start moving on its own. Stay out of its path, and turn off the power before you touch the opener, the arm or the control box. Leave board and wiring work to a technician.

Still stuck?

Write down any beeps, lights or error codes and request a repair.

Let’s get it moving.

Tell us what the gate is doing. A local gate tech follows up.

Request a repair
Request a repair